23/12/14
4/11/14
Twist Your Office Into a Bed
in DIY /
Twist Your Office Into a Bed
Take a look at creative solution for those that prefer to work at home or sleeping in their work place. Created by the designer Mira Schroder,
this bed desk is a valuable piece for any space of limited size. This
convertible furniture is equipped with a button that can transform the
bed into an office and vice versa. The desk surface is large enough to
work quietly, the storage solutions being efficient enough for a
significant amount of things that need to be in order and within reach.
Regarding the bed, there is no need to remove and put the sheets for
each use, for all you need to do is turn it over, so that it will be
protected from dust.
Multifunctional Arm Chair Flop
in DIY /
Multifunctional Arm Chair flop
Elena Sidorova,
designer from Moscow, Russia, has multifunctional arm chair called
flOP. “Flop is an armchair which folds out to a sleeping place for 1
person. It has construction made of veneer and upholstery made of 100%
sheep wool material. The sleeping place has elastic straps as a base.
Matras and pillow storage is inside.” Due to its dual function, this is
the one product that is most suitable for houses that have visitor’s
frequently and more numbers. This is an amazing dual purpose product.
DIY Glowing Resin Shelves
in DIY /
Resin-inlaid Wood
A non-jewellery post, for a change. We were running a bit short on
shelving in the kitchen and wanted somewhere we could store all the
preserves we're going to make from the garden this year, so we went to
the timber yard to see what they had. They had this, 155cm long piece of
chestnut.
It was pretty heavily cracked and pitted, with knotholes and so on. But,
I had a plan. Resin inlay. A technique traditionally used with a
colour-matched epoxy to the wood, to give an "invisible" repair. I'm
taking a slightly different approach.
I had a plan. Resin inlay. A technique traditionally used with a
colour-matched epoxy to the wood, to give an "invisible" repair. I'm
taking a slightly different approach.
First job, seal off the holes from the bottom, using aluminium plumber's
tape. It's super sticky so it seals well, and it won't be damaged by
the resin either. You might need these seals to hold for a few days,
depending on the weather.
tape. It's super sticky so it seals well, and it won't be damaged by
the resin either. You might need these seals to hold for a few days,
depending on the weather.
Make sure the wood is level, otherwise you'll end up with wonky resin bits.
Now it's time to mix the resin. Give it a good mixing and then add your
pigment. If you warm it up a bit, on a heater or with a hairdryer or
something, the bubbles will pop out of it much more easily. Bubbles can
ruin resin casts, so carefully mix and warm the resin, then let it sit
for a while, before pouring. It's going to take hours, even days, to
cure, so half an hour to de-bubble isn't a problem.
You know when I said this isn't going to be a traditional inlay? Here's
the pigmented resin in darkness. Awww yeah. This is going to be great.
So, pour it in, and wait. Come back in an hour or so to make sure none
of your seals are leaking. If they are, slap some more tape on and
refill with resin.
However long you think it's going to take, leave it longer. This was
poured in spring so took three days before it felt hard to the touch,
then I left it another three days just to be sure. Now, peel off your
tape and it's time to sand/plane/etc.
The overpour around the edges where the resin has soaked into the wood
is going to be a pain to remove. But I can already tell this is going to
look amazing.
More sanding. I'm really skipping over a LOT of work here. I spent
hours, and hours, carding, planing and sanding this. Chestnut is hard!
But eventually, it was done. I cut the big piece into the three shelves
it was going to be, and on to my favourite part. Boiled linseed oil cut
with white spirit. I love that first wipe of oil when the grain of the
wood just leaps out at you. Makes all those hours of preparation worth
it. Gave it about eight or nine thin coats, looks incredible.
View from the end. Visible inlay and spalting. Still a bit of woodworm damage visible.
Now it's time to get these up. The brackets are grey to match the colour
the wall is going to be once it's been repainted. I had some bits of
walnut around to make the other brackets.
And, they're up. In daylight they look like this:
Now, in darker conditions, you can really start to see the glow resin in action.
I think this one is my favourite. It's on the bottom of the top shelf, so it's visible in normal use.
Wall robot approves.
So there you go. Blue glow inlay into chestnut.
2/11/14
Significado de la palabra: HORÓSCOPO
in General /
Es importante que se conozca el significado verdadero de la palabra "Horóscopo": Proviene del griego “Hora” y de “Skopein” que significa “Examinar”, es decir: Es la observación o el examen que hacían los astrólogos antiguos de los astros, que al fin y al cabo, tenían que ser también: astrónomos, observadores, investigadores, matemáticos, físicos, químicos etc. para determinar tal o cual posición de los astros y constelaciones. Debemos recordar que tanto los Mayas como Nostradamus, fueron Astrólogos y Astrónomos, solo así pudieron dejarnos sus profecías, las cuales se basaron en exactos cálculos matemáticos y científicos, de los movimientos cósmicos en los astros y constelaciones.
Hoy en día el término Horóscopo ha sido manipulado y degradado, no tiene nada que ver con lo descrito. La definición para estos tiempos es: El pronóstico diario, signo por signo, que aparece en todas las revistas y diarios a nivel mundial. En donde, además, se encasilla a la población mundial en doce grupos diferentes - 12 signos zodiacales - algo que no tiene ningún sentido lógico. Desgraciadamente en la actualidad la palabra Horóscopo, está totalmente tergiversada y cualquiera se siente con suficiente autoridad para hablar de los signos, ignorando totalmente que el signo es solamente la punta del iceberg astrológico, el resto se mantiene sumergido dentro de las profundidades del estudio y el conocimiento de la Astrología.
Tanto los interesados como los escépticos deberían conocer que el estudio de esta disciplina ha absorbido la mente de la humanidad desde hace más de cuatro milenios. Constantemente los estudiosos a nivel mundial realizan nuevos descubrimientos y por lo tanto elaboran nuevas teorías e hipótesis. Aprender y practicar la Astrología con Ética y Seriedad no es tarea fácil, pero sin lugar a dudas puede llegar a proporcionar grandes compensaciones personales, siempre que se realice con sinceridad y sobre todo mostrando alternativas, sugerencias y evitando ser determinista…
30/10/14
22/10/14
12/10/14
Tutorial | Instalar Whatsapp en móvil Android sin SIM (HeyWire)
in Móviles /
Este método sí funciona, no como Yuilop y FonYou. En el vídeo explico
cómo instalar Whatsapp sin número de teléfono en un móvil Android (no
tablets ni otro tipo de dispositivos), es decir, sin una tarjeta sim de
una operadora como puede ser Vodafone, Orange, Yoigo...
Respondo a
todos los comentarios por norma, a excepción de aquellos que no consiga
interpretar, que no se hallen vinculados a una cuenta de Google + o que
hayan sido resueltos con aterioridad.
"No puedo agregar contactos"
Es muy fácil, sólo copia el número en tus contactos y, he aquí el truco, delante del número añade +34, por poner un ejemplo, quedaría tal que así: +34617902765
Esto en el caso de que el número sea español, para cualquier otro país consultar en Google bajo la fórmula: prefijo telefónico de "introducir país"
Nivel dificultad: Fácil
https://www.youtube.com/watch?v=rHP3SxlVrTo
https://www.youtube.com/watch?v=QhXPZLs6uzE
"No puedo agregar contactos"
Es muy fácil, sólo copia el número en tus contactos y, he aquí el truco, delante del número añade +34, por poner un ejemplo, quedaría tal que así: +34617902765
Esto en el caso de que el número sea español, para cualquier otro país consultar en Google bajo la fórmula: prefijo telefónico de "introducir país"
Nivel dificultad: Fácil
https://www.youtube.com/watch?v=rHP3SxlVrTo
https://www.youtube.com/watch?v=QhXPZLs6uzE
25/9/14
Curar la Diabetis en 30 dias
in General /
În acest documentar este vorba de 6 indivizi, bolnavi de diabet (doi cu diabet de tip I, și 4 cu diabet de tip II), dependenți de insulina și medicamente, care merg la o clinică de întinerire din Arizona, numită "Tree Of Life Rejuvenation center "(Copacul vieții) și acolo, timp de 30 de zile, manaca numai crudități, fac mișcare, stau într-un mediu ambiant plăcut și se relaxează. Rezulatele sunt spectaculoase: 4 dintre ei renunță complet la medicamente și insulina (inclusiv unul cu diabet tip I "" despre care se spune că este insulino dependent toată viața lui și binenteles netratabil, că așa se spune în medicină convențională "Diabetul nu se poate vindeca". Unul dintre ei renunță după 2 săptămâni, dar oricum și în cazul lui, efectele erau vizibile (renunțase complet la medicamente și insulina și avea valori normale de sănătate). Cel de-al 6 lea, cel mai rebel și condiționat dintre toți, care avea diabet de tip 1 din copilărie, nu a respectat condițiile de vindecare 100%, a ajuns la 5 unități de insulina în loc de 70 câte lua de obicei și și-a schimbat un pic atitudinea față de viață și tratament în sine..
Ne sunt prezentate încercările psihologice prin care trec eroii noștrii și luptă cu ideile preconcepute, cu multiplele condiționări pe care societatea, medicină convențională, mass media, anturajul, părinții, rudele șamd ni l-au oferit de când am venit pe lume.
CONCLUZIA: DA, DIABETUL ESTE TRATABIL !
Ne sunt prezentate încercările psihologice prin care trec eroii noștrii și luptă cu ideile preconcepute, cu multiplele condiționări pe care societatea, medicină convențională, mass media, anturajul, părinții, rudele șamd ni l-au oferit de când am venit pe lume.
CONCLUZIA: DA, DIABETUL ESTE TRATABIL !
Gordo, enfermo y casi muerto
in General /
Un hombre cuenta su historia en que hace un experimento viviendo solo de sumos naturales, llegando a ser..........
Si entiendes Ingles o Rumano mira el video que es muy interesante y te puede ayudar en tu vida. Lo siento por no tenerlo también en español, a ver si alguien se atreve a traducirlo al español también.
24/9/14
Surface Pro OS X Dual Boot
in PC /
****EDIT - Check my channel for the OS X 10.8 Installation video/tutorial!****
Also, here is an updated link to the files you will need, but unless you are confident in what you are doing, I'd recommend still checking out the installation video.
Pre-Install & Post-Install Materials: https://mega.co.nz/#!Owx3DDJT!YQj0g24...
****EDIT - Check my channel for Video #3 featuring the Surface Pro Pen!****
Feedback is welcome! Cheers!
****------------------------------------ -------------------------****
****EDIT****
Video #2 is up check my channel!!
*****EDIT*******
I have been making progress today (6/29) on getting a vanilla installation of OS X completed on the Surface. All graphics issues have been resolved. I will hope to post a video later today or tomorrow demoing the completed system.
This is a project I have been working on to set up a dual-boot with my Surface Pro. Sorry in advance for the shaky camera. What's working in OS X: Full resolution and QE/CI support, audio, internet (with USB adapter), full USB 3.0 support, front and rear camera, microSDXC slot, and the pen (without calibration)
If you would like any tutorials, or can possibly solve my one remaining issue, feel free to DM me.
What's not working: The touch screen does not work (and most likely never will). In addition, though the pen works, there is no method of calibrating it so it is not perfect - but it does work to some extent.
**EDIT**
This is the link to the Wifi USB Chip I used - http://www.amazon.com/gp/product/B003...
Also, here is an updated link to the files you will need, but unless you are confident in what you are doing, I'd recommend still checking out the installation video.
Pre-Install & Post-Install Materials: https://mega.co.nz/#!Owx3DDJT!YQj0g24...
****EDIT - Check my channel for Video #3 featuring the Surface Pro Pen!****
Feedback is welcome! Cheers!
****------------------------------------
****EDIT****
Video #2 is up check my channel!!
*****EDIT*******
I have been making progress today (6/29) on getting a vanilla installation of OS X completed on the Surface. All graphics issues have been resolved. I will hope to post a video later today or tomorrow demoing the completed system.
This is a project I have been working on to set up a dual-boot with my Surface Pro. Sorry in advance for the shaky camera. What's working in OS X: Full resolution and QE/CI support, audio, internet (with USB adapter), full USB 3.0 support, front and rear camera, microSDXC slot, and the pen (without calibration)
If you would like any tutorials, or can possibly solve my one remaining issue, feel free to DM me.
What's not working: The touch screen does not work (and most likely never will). In addition, though the pen works, there is no method of calibrating it so it is not perfect - but it does work to some extent.
**EDIT**
This is the link to the Wifi USB Chip I used - http://www.amazon.com/gp/product/B003...
Installation Guide OSX 10.9.1 on Surface Pro 2
in PC /
Installation Guide OSX 10.9.1 on Surface Pro 2 (10.9.2 works also with the new files)
OSX 10.9.1 on Surface Pro 2 Installation Guide
You can view the Tutorial and Download the FilesPackage here :
http://www.insanelymac.com/forum/topi...
Hi Everyone,
With the latest filesPackage that you can find at the end of this post, you can make a bootable stick to direct install OSX to your Surface Pro 2.
Direct Install OSX on Surface PRO 2
A. Make a bootable USB Mavericks (Vanilla Installation)
1. Prepare your USB as GUID partition map with a HFS+ partition.
2. Download Mavericks from the APPStore (it will be installed in your application folder) and mount InstallESD (Right click on "Install OS X Mavericks", then it's in /Contents/Shared Support/InstallESD.dmg)
3. Mount BaseSystem.dmg by typing the following in terminal: open /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg
4. Restore "OS X Base System" to your USB
5. Navigate to /System/Installation on your USB drive.
Delete the "Packages" link then copy the Packages folder from "OS X Install ESD" to this location.
6. Install Clover to the pen drive (http://sourceforge.n.../cloverefiboot/)
• Select your USB Drive and the select "Custom Install"
• Select "Install for UEFI booting only"
• Select Themes
• Select Drivers64UEFI
6. When installation is finished , copy Config.plist from attached files in EFI/CLOVER/
7. Copy dsdt.aml/ssdt-0.aml/ssdt-1.aml from attached files in EFI/CLOVER/ACPI/patched
8. Copy mach-kernel from attached files to your USB drive
9. Copy the extensions from the attached files to System/Library/Extensions
B. Prepare a partition to install OSX
1. Start Windows 8.1 on your Surface Pro 2
2. Go to the desktop, right click on the "Start" button, and open Disk Management
3. Select the C:\ partition, right click, and go to "Shrink Volume"
4. Enter the new size for the volume and click OK
5. Afterwards, right click on the empty space and select format
Format the new partition as NTFS
6. Shutdown the device
C. Install OSX on the Surface Pro 2
1. Power up holding the volume down, with the USB stick installed
2. Clover will boot up, choose your USB stick and boot without caches and injected kext
3. Open Disk Utility once the installer has come up
Locate the newly created NTFS partition and select "erase"
Change the file system to HFS+ (MacOS Extended Journaled)
Exit Disk Utility
4. Install OSX to your the New OSX Partition
• When the Installation is finished. It counting down to restart.
Go before the coundown is ended to the menu and launch the terminal
• If you are to late, boot again with volume down, choose your USB stick and boot without caches and injected kext and then start the terminal from the menu
5. Copy the extension
• cp -R /System/Library/Extensions/FakeSMC.kext /Volumes/"NEW OSX PARTITION"/System/Library/Extension s/
A Little Trick : Press the Up Arrow key in the command prompt, and you'll see the most-recently used command. Use your arrow keys to go back and erase FakeSMC.kext and replace it with the other Kexts.
• cp -R /System/Library/Extensions/AppleIntelCPU PowerManagement.kext /Volumes/"NEW OSX PARTITION"/System/Library/Extension s/
• cp -R /System/Library/Extensions/ACPIBatteryMa nager.kext /Volumes/"NEW OSX PARTITION"/System/Library/Extension s/
• cp -R /System/Library/Extensions/VoodooHDA.kex t /Volumes/"NEW OSX PARTITION"/System/Library/Extension s/
• cp --R /mach_kernel /Volumes/"NEW OSX PARTITION"/
6. Quit terminal and Shut Down the installer
7. Reboot back into Clover (you will need to hold the volume button again)
Select the newly installed Mavericks drive and boot without caches and injected kext
D. Post-install
1. Install HWSensors (http://sourceforge.n...ects/hwsensors/)
2. Install Touch-Base drivers (http://touch-base.co.../SurfacePro.htm)
3. HiDPI
If you just prefer to have a bigger UI, you can enable HiDPI.
this is the mode used by retina displays to show a 2x interface, and this helps for touch and pen inputs
Open the terminal
• type: sudo defaults write /Library/Preferences/com.apple.windowser ver DisplayResolutionEnabled -bool YES;
• Then download switchresx to enable custom resolution, from the sresx preference panel add this scaled resolution: 2732x1536
• this will add a 1366x768 Hidpi resolution, great for the surface.
E. Extra Hardware
It's also a good thing to buy a mini USB3-HUB (4 ports), a USB mini Wifi dongle that support OSX EW-7811UN (bought it on Amazon) or an USB Ethernet cable from Apple
You can view the Tutorial and Download the FilesPackage here :
http://www.insanelymac.com/forum/topi...
Hi Everyone,
With the latest filesPackage that you can find at the end of this post, you can make a bootable stick to direct install OSX to your Surface Pro 2.
Direct Install OSX on Surface PRO 2
A. Make a bootable USB Mavericks (Vanilla Installation)
1. Prepare your USB as GUID partition map with a HFS+ partition.
2. Download Mavericks from the APPStore (it will be installed in your application folder) and mount InstallESD (Right click on "Install OS X Mavericks", then it's in /Contents/Shared Support/InstallESD.dmg)
3. Mount BaseSystem.dmg by typing the following in terminal: open /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg
4. Restore "OS X Base System" to your USB
5. Navigate to /System/Installation on your USB drive.
Delete the "Packages" link then copy the Packages folder from "OS X Install ESD" to this location.
6. Install Clover to the pen drive (http://sourceforge.n.../cloverefiboot/)
• Select your USB Drive and the select "Custom Install"
• Select "Install for UEFI booting only"
• Select Themes
• Select Drivers64UEFI
6. When installation is finished , copy Config.plist from attached files in EFI/CLOVER/
7. Copy dsdt.aml/ssdt-0.aml/ssdt-1.aml from attached files in EFI/CLOVER/ACPI/patched
8. Copy mach-kernel from attached files to your USB drive
9. Copy the extensions from the attached files to System/Library/Extensions
B. Prepare a partition to install OSX
1. Start Windows 8.1 on your Surface Pro 2
2. Go to the desktop, right click on the "Start" button, and open Disk Management
3. Select the C:\ partition, right click, and go to "Shrink Volume"
4. Enter the new size for the volume and click OK
5. Afterwards, right click on the empty space and select format
Format the new partition as NTFS
6. Shutdown the device
C. Install OSX on the Surface Pro 2
1. Power up holding the volume down, with the USB stick installed
2. Clover will boot up, choose your USB stick and boot without caches and injected kext
3. Open Disk Utility once the installer has come up
Locate the newly created NTFS partition and select "erase"
Change the file system to HFS+ (MacOS Extended Journaled)
Exit Disk Utility
4. Install OSX to your the New OSX Partition
• When the Installation is finished. It counting down to restart.
Go before the coundown is ended to the menu and launch the terminal
• If you are to late, boot again with volume down, choose your USB stick and boot without caches and injected kext and then start the terminal from the menu
5. Copy the extension
• cp -R /System/Library/Extensions/FakeSMC.kext /Volumes/"NEW OSX PARTITION"/System/Library/Extension
A Little Trick : Press the Up Arrow key in the command prompt, and you'll see the most-recently used command. Use your arrow keys to go back and erase FakeSMC.kext and replace it with the other Kexts.
• cp -R /System/Library/Extensions/AppleIntelCPU
• cp -R /System/Library/Extensions/ACPIBatteryMa
• cp -R /System/Library/Extensions/VoodooHDA.kex
• cp --R /mach_kernel /Volumes/"NEW OSX PARTITION"/
6. Quit terminal and Shut Down the installer
7. Reboot back into Clover (you will need to hold the volume button again)
Select the newly installed Mavericks drive and boot without caches and injected kext
D. Post-install
1. Install HWSensors (http://sourceforge.n...ects/hwsensors/)
2. Install Touch-Base drivers (http://touch-base.co.../SurfacePro.htm)
3. HiDPI
If you just prefer to have a bigger UI, you can enable HiDPI.
this is the mode used by retina displays to show a 2x interface, and this helps for touch and pen inputs
Open the terminal
• type: sudo defaults write /Library/Preferences/com.apple.windowser
• Then download switchresx to enable custom resolution, from the sresx preference panel add this scaled resolution: 2732x1536
• this will add a 1366x768 Hidpi resolution, great for the surface.
E. Extra Hardware
It's also a good thing to buy a mini USB3-HUB (4 ports), a USB mini Wifi dongle that support OSX EW-7811UN (bought it on Amazon) or an USB Ethernet cable from Apple
7/9/14
Clones Alienígenas: Tú podrías tener un doble
in General /
David Parcerisa entrevista a Joaquín Piquer, testigo que nos cuenta en primicia un caso espeluznante de clonación alienígena. ¿Hasta qué punto algunos extraterrestres pueden haber llevado a cabo un programa para clonar seres humanos? ¿Podría cualquiera de nosotros tener un doble o clon viviendo infiltrado en nuestra sociedad? ¿Con qué finalidad se haría algo semejante? Esta y otras posibilidades son analizadas en esta interesante y sincera entrevista.
----------------------------------------------------------------
Suscribirse a:
Entradas (Atom)










